Enercon installed 140 wind turbines in the Atacama Desert for the energy company Colbún. Completion of a project under difficult conditions. What began in October 2022 with the delivery of the first rotor blades to the port of Antofagasta, Chile, culminated with the official inauguration of the Horizonte wind farm. Last November, the construction team … Continue reading Inauguration of the large Horizonte wind power in Chile
Continue readingTag Archives: Enercon
Wind power company Enercon expands its EP5 tower portfolio with new HST towers for its wind turbines.
New hybrid steel tower variants cover expected volume and make high hub heights available worldwide ENERCON is developing additional and taller hybrid steel towers (HST) for the current EP5 turbine types. With the additional steel tower variants, the tower portfolio will be expanded to cover the expected demand against the background of increasing customer demand … Continue reading Wind power company Enercon expands its EP5 tower portfolio with new HST towers for its wind turbines.
Continue reading
New variant of Enercon’s E-138 EP3 wind turbine for high-wind sites
Replacement in the discontinued E-82 wind turbine portfolio. Performance increase for all E-138 EP3 types Enercon will also offer the E-138 EP3 in a new variant for high-wind sites. This will replace the E-82 EP2 E4. The gap in the portfolio created by the discontinuation of the EP2 turbines will thus be quickly closed with … Continue reading New variant of Enercon’s E-138 EP3 wind turbine for high-wind sites
Continue reading
ENERCON, Salzgitter AG and TMGROUP cooperate to produce first lower-emissions steel tower for onshore wind turbine in Germany
Partnership to strengthen the sustainability of wind turbine towers / More than 70 percent reduction in CO2 emissions for every steel tower / Pioneer in onshore market in Germany and Europe Wind turbine manufacturer ENERCON, subsidiary of Salzgitter AG Ilsenburger Grobblech GmbH and TM Group company SMB Schönebecker Maschinenbau GmbH are cooperating to produce a … Continue reading ENERCON, Salzgitter AG and TMGROUP cooperate to produce first lower-emissions steel tower for onshore wind turbine in Germany
Continue reading
Enercon celebrates 3 GW wind energy milestone in Türkiye
ENERCON has reached an incredible milestone – 3 GW of installed capacity in Türkiye! With over 1,205 wind energy converters, ENERCON now holds a significant market share of 20.63 percent in Türkiye. Since entering the Turkish market in 1997, the company has grown from 1.5 MW to an impressive 3 GW. ” Türkiye continues to … Continue reading Enercon celebrates 3 GW wind energy milestone in Türkiye
Continue reading
Test campaign of the new E-175 EP5 E2 wind turbines
ENERCON’s preparations for wind power market launch are in full swing / Logistics are ready for delivery to prototype construction site in Germany ENERCON’s preparations for the market launch of the new E-175 EP5 E2 are in full swing: The prototype team is making further progress with the test campaign of the E2 generator at … Continue reading Test campaign of the new E-175 EP5 E2 wind turbines
Continue reading
Enercon receives an order for 38 MW of wind power in Romania
After 12 years, the CNE sales team secures its first major order for 7 E-160 EP5 wind turbines with a total capacity of over 38 MW. ENERCON had been negotiating since 2023 and the contract has now been signed and sealed: together with the customer Smart Power Generation Alfa S.R.L., ENERCON is realising the first … Continue reading Enercon receives an order for 38 MW of wind power in Romania
Continue reading
Enercon launches new sustainability strategy
Wind turbine manufacturer reinforces its commitment to sustainable use of resources // Clear goals for environmental and climate protection, social equity and transparency in corporate governance ENERCON’s founding principle is based on the vision of a clean and decentralised energy supply to cover increasing energy demands in harmony with the environment and society. By publishing … Continue reading Enercon launches new sustainability strategy
Continue reading
Enercon and Landsvirkjun sign contract for first large wind farm in Iceland
The planned wind farm comprises 28 x E-138 EP3 wind turbines with a total rated capacity of 120 MW The state-owned energy supplier Landsvirkjun relies on ENERCON wind turbines for the installation of the first large wind farm in Iceland. The contract with ENERCON covers the delivery and construction of 28 x E-138 EP3 turbines … Continue reading Enercon and Landsvirkjun sign contract for first large wind farm in Iceland
Continue reading
ENERCON plans to install another 2,500 MW of wind power in Türkiye with its partners
MoU signed with I? Enerji and Polat Enerji for the installation of E-175 EP5 wind turbines. ENERCON continues to play a leading role in the expansion of onshore wind power in Turkey. At the German-Turkish Energy Forum held today (27 November) in Berlin, the wind turbine manufacturer signed a letter of intent with Turkish energy … Continue reading ENERCON plans to install another 2,500 MW of wind power in Türkiye with its partners
Continue reading
Enercon commissions 40 MW Turkish wind farm for Kalyon
German wind turbine manufacturer Enercon GmbH has commissioned all wind turbines at a 40 MW wind farm in Türkiye, Turkey, on behalf of project owner Kalen Enerji, a unit of national energy group Kalyon Enerji. All 10 wind turbines at the Black Sea region site are already supplying electricity to the grid, Enercon said in … Continue reading Enercon commissions 40 MW Turkish wind farm for Kalyon
Continue reading
Enercon wind turbines with a total capacity of 104 MW for Luxembourg
ENERCON and the renewable energy company Soler entered into a turbine supply agreement: The contract was signed during WindEnergy in Hamburg and comprises the installation of 3 x E-115 EP3, 20 x E-138 EP3 and 1x E-175 EP5 with a total capacity of 104 MW across the country of Luxembourg. It is the first time, … Continue reading Enercon wind turbines with a total capacity of 104 MW for Luxembourg
Continue reading
German Federal Minister of Economics Robert Habeck visits Enercon factory in Aurich
Prominent visit to ENERCON’s Mechatronic Centre of Excellence in Aurich: Federal Minister of Economics and Vice-Chancellor Robert Habeck stopped off at ENERCON today (20 September) as part of his Northwest Tour. The Minister was able to gain a detailed insight into how ENERCON is preparing for the industrial ramp-up in the market upturn. ENERCON has … Continue reading German Federal Minister of Economics Robert Habeck visits Enercon factory in Aurich
Continue reading
Enercon installs E-175 EP5 prototype of its new wind turbines
The prototype of ENERCON’s new E-175 EP5 is now ready. The assembly team successfully completed the assembly of the first wind turbine of the new flagship model with a nominal output of 6.0 MW and a rotor diameter of 175 metres at the Borchen-Etteln plant (North Rhine-Westphalia) on 28 August. “This marks another important milestone … Continue reading Enercon installs E-175 EP5 prototype of its new wind turbines
Continue reading
Enercon and Bals/SelzEnergie sign contract for 330 MW of wind power
The large order includes 50 E-175 EP5 and 7 E-138 EP3 wind turbines for wind farms in southern Germany as well as two high-voltage substations. All projects have a high level of community involvement ENERCON and the Energiedienstleistungen Bals/SelzEnergie group of companies signed a contract yesterday for the supply and installation of 50 E-175 EP5 … Continue reading Enercon and Bals/SelzEnergie sign contract for 330 MW of wind power
Continue reading
‘E-Ship 1’, a wind-powered ship, calls at Algeciras
The E-Ship 1 ship, belonging to the German company Enercon, dedicated to the manufacture and distribution of wind turbines and a leader in wind energy, has called at the Port of Algeciras this Sunday. The ship measures 134 metres long and 22.5 metres wide and has a capacity to move 12,800 tonnes and a crew … Continue reading ‘E-Ship 1’, a wind-powered ship, calls at Algeciras
Continue reading
Polat Enerji orders 110.5 MW of Enercon wind turbines in Türkiye
Enercon announced today a contract for the delivery of 21 wind turbines with a combined capacity of 110.5 MW for wind power projects developed by Turkish renewables company Polat Enerji. The wind turbines will be used for the expansion of the Yalova/Goktepe 4, Kirsehir/Geycek 3 and Izmir/Ege 3 projects. The order is for 19 of … Continue reading Polat Enerji orders 110.5 MW of Enercon wind turbines in Türkiye
Continue reading
Enercon reaches 1 GW of installed wind power in Spain
Enercon celebrates an event in Gran Canaria to commemorate 1 GW of installed power in Spain, sharing its story about a long journey. The event, organized in Las Palmas de Gran Canaria, was held to celebrate Enercon reaching the milestone of 1 GW of installed power with 66% of the market share in the Canary … Continue reading Enercon reaches 1 GW of installed wind power in Spain
Continue reading
Enercon and Enerjisa Üretim sign turbine delivery agreement for the second phase of the YEKA 2 wind power plant
Following the successful fulfilment of the 750 MW wind turbine delivery agreements in the first phase, the companies have taken another step towards completing the 1,000 MW project by signing a delivery agreement for the remaining 250 MW capacity. ENERCON and Enerjisa Üretim, two of the leading companies in Türkiye’s wind energy sector, announced their … Continue reading Enercon and Enerjisa Üretim sign turbine delivery agreement for the second phase of the YEKA 2 wind power plant
Continue reading
Enercon installs 2.4 GW of wind turbines in 2023
German wind turbine manufacturer and installer Enercon GmbH installed 2,421 MW of wind power in 2023, a 28% increase over the previous year. With a total of 628 wind turbines, Enercon achieved its operational goals over the past year. In 2022 it completed 522 wind turbines with a combined capacity of 1,887 MW. The lower … Continue reading Enercon installs 2.4 GW of wind turbines in 2023
Continue reading